775/46 BrightLine HC
Produktinformationen "775/46 BrightLine HC"
AOI 0°
Durchmesser 25 mm, Ringdicke 3,5 mm
Durchmesser 25 mm, Ringdicke 3,5 mm
Spezifikationen
| OEM-/Originalnummer: | FF01-775/46-25 |
|---|---|
| Transmission Band 1: | Tavg > 93% 752 - 798 nm |
| Center Wavelength 1: | 775 nm |
| Guaranteed Minimum Bandwidth 1: | 46 nm |
| FWHM Bandwidth 1 (nominal): | 54.7 nm |
| Blocking Band 1: | ODavg > 1 200 - 400 nm |
| Blocking Band 2: | ODavg > 2 400 - 545 nm |
| Blocking Band 3: | ODavg > 5 545 - 690 nm |
| Blocking Band 4: |
ODavg > 10 690 - 730 nm Design specification measurements are noise-floor limited |
| Blocking Band 5: | OD > 3.5 741 nm |
| Blocking Band 6: | ODavg > 5 824 - 925 nm |
| Blocking Band 7: | ODavg > 2 925 - 1050 nm |
| Blocking Band 8: | ODavg > 1 1050 - 1100 nm |
| Angle of Incidence: | 0 ± 5 degrees |
| Cone Half-angle: | 7 degrees |
| Optical Damage Rating: | Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hrs. |
| Filter Effective Index: |
1.81 Understanding `Effective Index of Refraction` neff |
| Substrate type: | low-autofluorescence optical quality glass |
| Transverse Dimensions (Diameter: | 25 mm |
| Transverse Tolerance: | + 0.0 / - 0.1 mm |
| Filter Thickness (mounted): | 3.5 mm |
| Filter Thickness Tolerance (mou: | ± 0.1 mm |
| Clear Aperture: | ≥ 22 mm |
| Scratch-Dig: | 60-40 |
| Substrate thickness: | 2.0 mm |
| Orientation: | Arrow on ring indicates preferred direction of propagation of light |
| Other physical specs: | Standard Specifications of Our Filters and Beam Splitters |
| Abmessungen: | D = 25 mm |
| Anzahl Bänder/Kanten/Notch: | 1 |
| Art des Filters: | Bandpass |
| Anwendung (Filter): | Standard/Fluoreszenz |
| CWL/EdgeWL/NotchWL (nm): | 775 |
| Bandbreite (nm): | 46 |
| Substratdicke: | 2,0 mm |
| Scratch-Dig: | 60-40 |
| freie Apertur: | >= 22 mm, >= 22 mm |